Imaging components. Procurement support.

APPLICATION BRIEF

OEM thermal integration

Build thermal imaging into your equipment. Start with the scene the core needs to see, then agree how the image, controls and power connect to your host.

Discuss this application
Application illustration of a thermal camera evaluation bench with an upright circuit board and a connected laptop.
Illustrative scene and thermal view; not captured product output.

WHAT TO DEFINE

Build the right configuration brief.

Imaging channel

Thermal observation, visible imaging, or a system that uses both channels.

Host connection

Accepted video format, control connection, connector pinout and required conversion hardware.

Mechanical fit

Board footprint, assembly depth, lens protrusion, cable routing and mounting points.

SOURCING DISCUSSION

Connect the application
to the specification.

A compact core does not describe the space required by the complete assembly. Bring the host interface and mechanical constraints into the discussion early. Confirm the selected video output, control connection, connector pinout and any interface board or cable needed by your equipment.

The integration setup and screen image are illustrative. They are not a TORSUN installation or captured output from the listed MINI 640-2. Calibrated temperature data and application software must be confirmed separately if required.

Read the selection guide

View MINI 640-2 Radiometric

Thermal core or complete thermal camera: what a 21 × 21 mm core does on its own, and what your product has to add

Raspberry Pi, Jetson or a microcontroller? Choosing the host computer for a USB radiometric thermal module

USB, MIPI or DVP: getting temperature data out of a radiometric thermal core

COMPONENT REFERENCE

A starting point for discussion.

Application scenes and thermal views are AI-generated illustrations. They do not depict TORSUN facilities, customers or completed projects, and are not captured output from the listed modules.

Share your application brief.

Start with the conditions and requirements your design depends on.

Discuss your requirements